结果谷歌一系列的查找资料,最后还是到了hetzner的wiki找到了解决办法。

1.proxmox桥接网卡配置:

# /etc/network/interfaces
### Hetzner Online GmbH - installimage
# Loopback device:
auto lo
iface lo inet loopback
#
# device: eth0
auto  eth0
iface eth0 inet static
       address

netmask 255.255.255.255 pointopoint gateway # iface eth0 inet6 static address

#eg: 2001:db8::2 netmask 128 gateway fe80::1 up sysctl -p # for single IPs auto vmbr0 iface vmbr0 inet static address 10.0.1.1 netmask 255.255.255.0 bridge_ports none bridge_stp off bridge_fd 0 # iface vmbr0 inet6 static address

#eg: 2001:db8::2 netmask 64

关于Nat链接网络请使用iptables实现。

2.solusvm下网卡配置:

主网卡中默认配置请不要修改,仅需将IPV6ADDR的/64换为/128
例如:IPV6ADDR= 2001:db8::2/128
然后将桥接网卡更改为:

DEVICE=br0
ONBOOT=yes
TYPE=Bridge
BOOTPROTO=static
IPADDR=10.0.1.1
NETMASK=255.255.255.0
IPV6ADDR=2001:db8::2/64

关于联网与端口映射请使用iptables

3.关于虚拟机(kvm)的配置:

这里拿2001:db8::此ipv6做示范
Debian or Ubuntu:

iface eth0 inet6 static
       address    2001:db8::f001
       netmask   64
       gateway   2001:db8::2

Centos:

IPV6INIT=yes
IPV6ADDR=2001:db8::f001/64
IPV6_DEFAULTGW=2001:db8::


https://eqblog.com/hetzner-proxmox-solusvm-nat-kvm-ipv6.html